Multitrans or EP

Our MULTITRANS range is used for conveying all types of material, in bulk, cold (<80°C) and neutral, in all extraction and transformation industries, under average to severe working conditions.

Our MULTITRANS belt consists of 3 to 5 EP (polyister warp and polyamide weft) synthetic fabric plies with a rubber interface, the thickness of which varies according to the type.

• The low-elongation polyester fibres are used in the warp direction to reduce the length of the tension travels.

• The more elastic polyamide fibres are used in the weft, to ensure good troughing.

• The carcass is protected by covers of D grade (superior quality anti-abrasive) which is recommended for very abrasive products and sharp materials (abrasion loss as per
NFT 46012, ISO 4649 and DIN 53516, average value 100 mm3). These belts can also be produced with X, Y or Z cover grades standardised as per DIN 22102.

 

For average to severe working conditions

Areas of application

• Quarries/sand pits (grain size < 400 mm)
• Thermal power plants (coal, ash)
• Cement works (quarry materials, added materials, cold clinker)
• Fertiliser factories / Chemical plants (non chemically aggressive materials)
• Port installations (ores, coal, phosphates)
• Mining/Iron and Steel Industry (ores, coke, added materials)
• Paper mills (wood, edgings)
• Salt marshes / Salt works
• Sugar factories (sugar beet and sugar beet chips)
• Glassworks (raw materials, cullet)

 -> more information

 

Important notice: This brochure has been prepared carefully, to advise our customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
Please note: Before using the product in new areas of application which are not covered by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard.
Subject to errors and printing errors.
Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions.

Date of publication 06/2007 1st edition
Subject to changes.