[Translate to English:]

Transtherm

This range is designed to meet the increasing mechanical and thermal stresses generated by the conveying of materials at temperatures between 100 °C and 220 °C with possible peaks at 300 °C.

Optimum performances are obtained with the TEC cover.

SEMPERTRANS is able to offer you three possible structures:

• Multiply consisting of 2 to 4 plies of EP (polyester warp and polyamide weft) or PP (polyamide warp and polyamide weft) woven fabric with rubber interfaces.

• Multiply consisting of EP (polyester warp and polyamide weft) or PP (polyamide warp and polyamide weft) woven fabric with rubber interfaces protected by an anti-shock metal shield incorporated in the top cover.

• Entirely metal carcass comprising a heat shield incorporated in the top cover. (MWH belt of which the heat shield has the property of evacuating the stored calories).

 

 

 

 

High heat



Areas of application

• Cement works
• Iron and steel industry
• Chemical industries - Fertilisers
• Foundries
• Lime kilns
• Mining industries
• Salt works
• Public works
• Glassworks

This list is not exhaustive. Our technical sales representatives are at your disposal to advise you in your choice and in any other application justifying the use of the TRANSTHERM belt.

 -> more information

 

Important notice: This brochure has been prepared carefully, to advise our customers. The information stated therein is state of the art and the results of different tests carried out over several years. Individual operating conditions affect any product, which means that a product can only offer the safety that can be expected on the basis of the data provided in our product information. In the event that the product is used otherwise than in conformity with the specifications, such safety may not be assumed. Our responsibility is limited exclusively to delivery of the conveyor belt in accordance with the specifications.
The figures stated in our documents are mean approximate values for information but no specified or warranted values.
Please note: Before using the product in new areas of application which are not covered by the product information a Sempertrans engineer MUST be asked for advice. Stocking, care and maintenance of all our products must be performed according to our stocking, care and maintenance guidelines and according to ISO 5285 standard.
Subject to errors and printing errors.
Reproduction of any kind - also of excerpts - only upon express written consent of Sempertrans. The brochure shall remain the property of Sempertrans and is the most recent version. All transactions shall be exclusively subject to our general terms and conditions.

Date of publication 06/2007 1st edition
Subject to changes.